Dräger Evita 4 - Note Automatic Self-Test

● Hook holder onto a standard rail and clamp into place.
● Hang Remote Pad into holder from above.
Note automatic self-test
– when connecting the Remote Pad to Evita 4 while the
latter is switched on
or
– when switching on Evita 4 after connecting the
Remote Pad.
● Do not press any keys on the Remote Pad.
● All LEDs on the Remote Pad light up for 5 seconds:
– Red LED
– Yellow LED
– Yellow LEDs in the keys
● The Remote Pad is tested by Evita 4. An advisory
message is output if a fault is detected, see page 127
"Troubleshooting".
39
Preparation
Remote Pad