Dräger Evita 4 - Selecting the Patient Mode; Entering the Ideal Body Weight; Select the Previous Settings

The screen key »prev. patient« can be used to restore
the specific patient settings, including alarm limits and
monitoring status, effective before switching off the
device.
Example:
Previous patient
The previous modes are displayed in the status line:
– Previous ventilation mode
– Previous patient mode
– Previous application mode (tube or mask for
optional NIV)
The key »prev. patient« is not displayed by Evita 4
following a loss of data or removal of a previously used
option (e.g. NeoFlow), thus preventing restoration of the
previous setting.
Restoration of the previous setting is similarly prevented
by Evita 4 if it was configured in such a way before
switching off that the former patient mode is no longer
available.
Selecting the patient mode
if configured
EITHER
● the »Adults« key or
the »Paed.« key or
the »Neo.« key (NeoFlow option) and
enter the ideal body weight
if configured
With the ideal body weight, Evita 4 determines the
start-up settings of the ventilation parameters. The
start-up value is marked on the relevant screen knob
by an arrow ( j).
● Touch the screen knob.
● Enter the ideal body weight [kg] with the manual
dial-knob = turn rotary knob.
● Confirm the setting = press rotary knob.
OR
Select the previous settings
● Touch the key »prev. patient«.
● Confirm = press rotary knob.
51
Operation
Starting up
063 37 207
062 37 207