11
Assembly and preparation
Transport within the hospital
Transport refers to any movement of the medical
device without the patient that does not serve to po-
sition the medical device.
Increasing the tipping stability
z Swivel the control and display unit (Medical
Cockpit) until it is centrally aligned with the ven-
tilation unit.
z Set the hinged arms to minimum extension.
z Drain the water container of the breathing gas
humidifier.
z Secure the breathing gas humidifier to the trol-
ley, not to the side rails of the ventilation unit.
z Do not attach any additional parts to the side
rails of the ventilation unit.
z If fitted, slide the bed coupling into its retracted
position.
z Grasp the trolley handle firmly and push the de-
vice in longitudinal direction.
Safety information for patient transport within the
hospital also applies, see instructions for use.
To Next Page
Loading...
