Dräger HFG 000 Series - Device Status; Connection; User Level; Display in Gas Channel

Technical manual | X-am® 3500/8000 17
Operation
4.2.4 Device status
4.2.5 Connection
4.2.6 User level
4.2.7 Display in gas channel
Symbol Explanation
Overview of the bump test intervals activated (additional infor-
mation for the D-Light feature).
There are no gas alarms or errors.
Monitoring of the calibration intervals activated, D-Light function
deactivated (additional information for the D-Light function).
There are no gas alarms or errors.
Alarm message
Warning message
The gas detector can be operated normally. If the warning mes-
sage is still displayed after operation, the gas detector requires
maintenance. Menu Messages displays details.
Fault message
The gas detector or measuring channel is not ready to measure
and requires maintenance. Menu Messages displays details.
Information message
Menu Messages displays details.
STEL alarm message
TWA alarm message
Event report
Symbol Explanation
Maintenance mode (access to the device via PC or X-dock)
Bluetooth
®
activated
Bluetooth
®
deactivated
Bluetooth
®
connection established
Symbol Explanation
User level 1
User level 2
User level 3
Symbol Explanation
Bump test or calibration successful
Bump test or calibration failed
Measurement range exceeded