EasyManua.ls Logo

Dräger Infinity Delta XL - Page 556

Dräger Infinity Delta XL
614 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
B-30 DELTA/DELTA XL/KAPPA VF8
B T
ECHNICAL DATA
tpO
2
/CO
2
Pod
FiO
2
Sensors
Physical Attributes
Size (H x W x D): 52 x 132 x 153.4 mm (2.05 x 5.2 x 6.04 in)
Weight: 454 g (1 lb)
Connections: Connector for tpO2/tpCO2 solid-state electrode
Connector for pod-monitor interface cable
Interface Cable: 1m
Degree of protection against ingress of
water:
per IEC 60601-2-27 clause 44.3
Electrical Specifications
Mode of operation: Continuous
Power requirements: DC powered directly from the monitor
Protection against electric shock: Type CF
Environmental Requirements
Temperature range: Operating:15 to 40 °C (55 to 104 °F)
Storage: –20 to 50 °C (–-4 to 122 °F)
Relative humidity: Operating:20 to 95 %, non-condensing
Storage: 10 to 95 % (with packaging)
Atmospheric pressure: Operating:550 to 775 mmHg (73 to 103 kPa)
Storage: 375 to 795 mmHg (50 to 106 kPa)
Physical Attributes
Size (H x D): 40 x 30 mm (1.59 x 1.2 in)
Weight: 35 g (<1.2 oz)
Connections: NeoMed Pod, interface cable
Mounting: 16 mm thread x 1 mm pitch
Sensor type: Galvanic fuel cell (partial pressure)
Useful life: Approximately 1 year
NOTE: This sensor contains lead and caustic material. Dispose of or recycle properly and in
accordance with local regulations.
Environmental Requirements
Temperature range: Operating:10 to 40 °C (50 to 104 °F)
Storage: –10 to 50 °C (14 to 122 °F)
Relative humidity: Operating:20 to 90 %, non-condensing
Storage: 10 to 95 % (with packaging)
Atm. pressure: 600 to 900 mmHg (80 to 120 kPa)

Table of Contents

Other manuals for Dräger Infinity Delta XL

Related product manuals