Dräger Narkomed 2C - PMS Criteria Screen

NM2C DIAGNOSTICS (continued)
2.3 PMS Criteria Screen
The PMS Criteria Screen allows a service representative to select for display
the month of the next scheduled Periodic Manufacturer’s Service. This screen
is shown in Figure 2-5.
To enter the PMS Schedule Service Screen from the Main Service Screen,
highlight PMS CRITERIA (ref. Figure 2-3) with the selection wheel and press
the trigger.
Turn the selection wheel to indicate the desired month, and press the trigger
to enter that month.
To return to the Main Service Screen, select EXIT and press the trigger.
SELECT CRITERIA FOR "PREVENTIVE MAINTENANCE" MESSAGE
1993
MONTH:
EXIT
SELECTS
FUNCTION
⇒ TO ADJUST
SETTING
MAR
Figure 2-5: PMS CRITERIA SCREEN
Rev. A
2-5
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS