NM2C REPLACEMENT PROCEDURES
4.0 REPLACEMENT PROCEDURES
This section outlines removal and replacement procedures for the field-replaceable
assemblies of the NARKOMED 2C Anesthesia System.
These procedures are to be performed only by a Draeger Medical, Inc. qualified
Technical Service Representative (TSR).
The following are the only procedures authorized by Draeger Medical, Inc. to be
performed in the field. All other service procedures shall be referred to Draeger
Medical, Inc.’s Technical Service Department.
NOTE: The PMS PROCEDURE given in Section 6 must be performed
after any replacement, removal, calibration or adjustment
procedure.
Rev. F
4-1
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
To Next Page
Loading...
