Instructions for use | Oxylog VE300 SW 1.n 29
Operating concept
4.2 Structure of the screen
Screen in operation mode
Screen in the event of alarms
In the event of alarms, the upper area of B and the entire area of D are used to
indicate alarms.
The lower area of B and the entire areas of C and E are used to display additional
information, e.g., while adjusting parameters.
28206
No. Designation
A Patient category
B Ventilation category (CPR, Ventilation (volume), Ventilation (pressure),
CPAP) and ventilation mode (VC-CMV, VC-AC, VC-SIMV, PC-BIPAP,
SPN-CPAP)
C Display of power supply and remaining duration of battery operation
D Oxygen mode (100 % O
2, O2/air mix)
E Display of current gas consumption
F Button to switch or exit the dialog
G Dialog (available: start dialog, configuration dialog, ventilation dialog,
service dialog)
To Next Page
Loading...
