Dräger Oxylog VE300 - Changing the Ventilation Mode

Instructions for use | Oxylog VE300 SW 1.n 63
Operation
1. Adjust the following parameters using the therapy controls:
A Respiratory rate RR
B Tidal volume VT
2. Press the More settings button (C) and adjust the following parameters and
settings:
A Inspiratory oxygen concentration FiO
2 (100 % O2 or O2/air mix)
B Maximum airway pressure Pmax
C Positive end-expiratory pressure PEEP
D Ratio of inspiratory time to expiratory time I:E
7.4 Changing the ventilation mode
It is possible to change the ventilation mode at any time during operation.
By means of the screen
To go back to the ventilation category selection at any time during operation:
1. Touch the X button.
The ventilation category selection screen is displayed.
2. Select the desired ventilation category in 3 steps.
2823928238
A
B
C
A
BCD
28234