70 Instructions for use | Oxylog VE300 SW 1.n
Alarms
8.3 Alarm indication
In the event of an alarm, the following optical and acoustic alarm signals are
generated simultaneously:
– The LED flashes red (A) when a high-priority alarm is active and yellow (B) when
a medium-priority alarm is active.
– The alarm message is displayed in the middle of the screen at the top, and is
color-highlighted (B). When several alarms are active simultaneously, the alarm
with the highest priority is displayed.
– The acoustic alarm signal sounds.
When an alarm is triggered by a measured value, the measured value in question
also lights up red or yellow according to the alarm priority.
When the cause of an alarm has been eliminated, the acoustic alarm signal stops
and the alarm message disappears.
All active alarms and the alarm history can be viewed in the logbook. For further
information, see the following chapter: "Logbook", page 86
2939829399
To Next Page
Loading...
