Dräger Oxylog VE300 - Page 79

Instructions for use | Oxylog VE300 SW 1.n 79
Configuration
9.9.1 Language
Here any of the languages programmed into the system can be selected. When the
new language is confirmed, the device switches to it immediately.
9.9.2 Date
Here the system date of the device can be set.
– Day (A)
– Month (B)
– Year (C)
– OK and Cancel buttons (D) to save or cancel the date setting.
Day, Month and Year must each be confirmed individually with the rotary knob.
Then all the settings must be confirmed with OK, or can be discarded with Cancel.
9.9.3 Time
Here the system time of the device can be displayed and set.
– Hours (A)
– Minutes (B)
– OK and Cancel (C) buttons to save or cancel the time setting.
Hours and Minutes must each be confirmed individually with the rotary knob.
Then all the settings must be confirmed with OK, or can be discarded with Cancel.
29388
AB C
D
29389
AB
C