32
9. Ordering List
Designation Part No.
Dräger Dräger RailGard-S1, 1-channel 4-20mA controller
for DIN rail mounting, without power supply unit, 2
potential-free normally closed contacts
SC00010
Dräger Dräger RailGard-S4, 4-channel 4-20mA controller
for DIN rail mounting, without power supply unit, 2
potential-free normally closed contacts
SC00011
Dräger Dräger RailGard-S6, 6-channel 4-20mA controller
for DIN rail mounting, without power supply unit, 4
potential-free normally closed contacts
SC00012
Dräger Dräger RailGard-W1, 1-channel 4-20mA controller
in wall-mounted case, with power supply unit (2.5 A), 2
potential-free changeover contacts
SC00013
Dräger Dräger RailGard-W4, 4-channel 4-20mA controller
in wall-mounted case, with power supply unit (2.5 A), 2
potential-free changeover contacts
SC00014
Dräger Dräger RailGard-W6, 6-channel 4-20mA controller
in wall-mounted case, with power supply unit (2.5 A), 4
potential-free normally closed contacts
SC00015
Internal converter module SE Ex -> 4-20 mA for Dräger
Dräger RailGard-W1 and -W4 (not -W6)
SC00016
Converter module SE Ex -> 4-20 mA, for mounting on top-
hat rail
3603560
Configuration set (cable and software) SC00017
Power supply unit 5A, for DIN rail mounting (for up to six
transmitters)
AG00286
To Next Page
Loading...
