64
Technical Data
Technical Data
X-am 5000
Ambient conditions:
during operation and
storage
Temperature class T4 (-20 to +50 °C):
NiMH power packs type: HBT 0000, HBT 0100
Power pack type: ABT 0100
with alkaline single cell type: Duracell Procell MN 1500
1)
,
Duracell Plus Power MN 1500
1)
Temperature class T3 (-20 to +40 °C):
Power pack type: ABT 0100
with NiMH single cell type: GP 180AAHC
1)
with alkaline single cell type: Panasonic LR6 Powerline
Temperature class T3 (0 to +40 °C):
Power pack type: ABT 0100
with alkaline single cell type: Varta 4006
1)
, Varta 4106
1)
1) Not part of the BVS 10 ATEX E 080 X and PFG 10 G 001 X technical suitability tests.
Temperature range over
a short period (ATEX &
IECEx only)
1)
:
-40 to +50 °C
Maximum of 15 minutes with NiMH power pack T4 (HBT
0000) or T4 HC (HBT 0100)
Prerequisite: storage of the instrument at room temperature
(+20 °C) for at least 60 minutes in advance.
Air pressure 700 to 1300 hPa
Humidity 10 to 90 % (to 95 % briefly) relative humidity
Device data
Protection class IP 67 for devices with sensors
Alarm volume Typically 90 dB (A) in 30 cm distance
Operation time
– Alkaline battery Typically 12 hours under normal conditions
– NiMH
power pack:
T4 (HBT 0000)
T4 HC (HBT 0100)
Typically 12 hours under normal conditions
Typically 13 hours under normal conditions
Dimensions approx. 130 mm x 48 mm x 44 mm (H x W x D)
Weight approx. 220 g to 250 g
Storage time
X-am 5000
Sensors
1 year
1 year
Position of use any
Refresh interval for
display and signals
1s
To Next Page
Loading...
