68
Order List
Spare parts
DrägerSensor CatEx 125 PR, 0 to 100 %LEL
(or 0 to 100 vol.% methane)
68 12 950
DrägerSensor Cat Ex 125 PR Gas, 0 to 100 %LEL 68 13 080
DrägerSensor XXS O
2
, 0 to 25 vol.%
5)
68 10 881
DrägerSensor XXS O
2
100, 0 to 100 vol.% 68 12 385
DrägerSensor XXS CO, 0 to 2000 ppm
1)
68 10 882
DrägerSensor XXS H
2
S, 0 to 200 ppm
1)
68 10 883
DrägerSensor XXS CO LC, 0 to 2000 ppm
1)
68 13 210
Other DrägerSensors upon request
6)
1) Not part of the BVS10 ATEX E 080X and PFG 10 G 001X technical suitability test.
2) The filter set for X-am 1/2/5000 (order no. 83 19 364) includes a 5 mm tube connection set to connect
the probe to the pump.
3) This accessory is optimised for the Dräger X-am Pump (market launch in 2017) (for hoses with 3 mm
inner diameter).
4) 3 mm tube connection set (order no. 83 27 641) required.
5) Expected sensor life time: O
2
, CO and H
2
S >5 years, CatEx > 3 years.
6) Data sheets for all sensors that may be used with the device can be downloaded from the product
page of the X-am 5000 on the following website: www.draeger.com.
Name and description Order no.
To Next Page
Loading...
