Dräger X-am 5600 - Configuring the Instrument

24
Configuring the Instrument
To individually configure a instrument with standard configuration, the instrument must
be connected with a PC.
The installed PC software Dräger CC Vision is used for configuration.
 Observe the documentation and online help of the software.
IR
Calibration cradle (order no. 83 18 752)
with inserted
USB DIRA with USB cable (order no. 83 17 409)
USB DIRA with USB cable
(order no. 83 17 409)
E-Cal module Dräger X-am 125
(order no. 83 18 754)
USB 2.0
USB 2.0
USB 2.0 / COM
01433072_01_en.eps
Dräger
CC-Vision
Dräger
CC-Vision
Dräger
CC-Vision
E-Cal
0
0
0
X-am 5600