BY ANY DAMAGE TO THE BOAT:
Contact your dealer or the yard for instructions. If not, you could endanger your safety
and/or lose your warranty.
GELCOAT REPAIRS:
IMPORTANT
Successful repairs require dry weather and a temperature between +15° to 25° C.
• Ratio of hardener is min 2% and max 3%.
• Gel setting time is approx. half an hour.
• Never work in direct sun when applying gelcoat .
How to make gelcoat repairs:
• First sand the actual repair with grit 80.
• Then sand the area around it with grit 180-240.
• Apply gel coat by 2 or 3 layers.
• When completely dry sand it down with 120-240, thereafter with 500 – 800 – 1,200.
• After that polish with rubber compound and finally wax the whole area.
• Use lots of ventilation, gloves, glasses and dust mask.
• Keep children away.
WARNING
• The catalyst is a dangerous product and should not be left within children’s reach.
• Avoid contact with skin and mucosa. Protect your eyes.
• In case of contact, wash with soapy water and rinse liberally.
Clean all tools with acetone.
To Next Page
Loading...
