To Next PageTo Next Page
Need help?Do you have a question about the DRAKE R8B and is the answer not in the manual?
General| Type | Communications Receiver |
|---|---|
| Dimensions | 286 x 114 x 279 mm (11.25 x 4.5 x 11 inches) |
| Weight | 5.5 kg (12 lbs) |
| IF Rejection | >80 dB |
| Image Rejection | >70 dB |
| Input Impedance | 50 ohms |
| Modes | AM, CW, SSB |
| IF Frequencies | 455 kHz |
| Power Requirements | 50/60 Hz |
| Noise Figure | <10 dB |
| Power Supply | Internal |
| Operating Temperature | 50 degrees Celsius |
Covers items 1-14, providing essential safety guidance for appliance operation.
Covers items 15-21, detailing further safety measures and installation guidelines.
Lists technical performance details and operating parameters.
Details optional or included add-on equipment.
Explains how to set voltage for different regions and fuse requirements.
Covers initial setup, placement, and permanent setup.
Details mobile use and antenna connection requirements.
Describes primary controls like Volume, RF Gain, Tuning, Power, Mode, and Function buttons.
Explains the LCD display, indicators, and tuning resolution options.
Covers initial power-on, resets, beeps, and basic controls like squelch and RF gain.
Explains auto mode and setting default parameters for modes.
Covers VFO selection and direct frequency input methods.
Details Passband Offset, Notch, and AM Synchronous Detector for signal tuning.
Covers signal conditioning and specific mode tuning strategies (CW, RTTY, SSB).
Explains FM mode characteristics and Automatic Gain Control usage.
How to program and access stored frequencies and settings.
Covers deleting, locking, and erasing all memory locations.
Explains different scan types (Memory, List, A-B) and their programming methods.
Details specific A-B scan features and important operational tips for scanning.
How to set and use the dual clocks for local and UTC time.
Explains programming ON/OFF times for events and wake/sleep timers.
Details external device control via the timer connector for unattended recording.
Interface customization for function buttons and display brightness.
Specific scan adjustments (10/9 kHz) and power-on button functions.
How to connect and configure the receiver for computer operation.
Steps for transferring memory channels to/from a PC.
Technical details on command structure and data formats for computer control.
Guides users through diagnosing and fixing common operational issues.
Explains error codes and status indicators like PWRFAIL and UNLOCKD.
Procedures for contacting support, returning the unit, and warranty claims.
Terms and conditions of the product warranty.
