On the next page as shown below, please select the WAN interface (at present,
only WAN1 is available) that you use and specify the DSL mode.
On the next page, please select the appropriate protocol according to the
information from your ISP. For example, you should select PPPoE mode if the
ISP provides you PPPoE interface.
P
P
P
P
P
P
o
o
E
E
/
/
P
P
P
P
P
P
o
o
A
A
1. Choose WAN1 as WAN Interface and click the Next button; you will get the
following page. Choose PPPoE / PPPoA as the protocol.
Encapsulation for PPPoE/PPoA contains PPPoE and PPoA; encapsulation for
MPoA/Static or Dynamic IP contains 1483 Bridged IP and 1483 Routed IP.
To Next Page
Loading...
