Draytek Vigor2620 LTE Series User Manual

Vigor2620 Series User’s Guide
4
V
V
i
i
g
g
o
o
r
r
2
2
6
6
2
2
0
0
L
L
n
n
/
/
V
V
i
i
g
g
o
o
r
r
2
2
6
6
2
2
0
0
L
L
n
n
e
e
LED Status Explanation
Off The router is powered off.
Blinking The router is powered on and running normally.
On The router is ready to access Internet.
Off The router is not ready to access Internet.
Blinking Slowly: The DSL connection is ready.
Quickly: The DSL connection is establishing.
On Physical line has been connected.
Blinking The connection is training.
On The LAN port is connected.
(for
Vigor2620Ln)
Blinking The data is transmitting through the LAN port.
On The LAN port is connected.
(for
Vigor2620Lne)
Blinking The data is transmitting through the LAN port.
On LTE device is connected and ready for use.
Off LTE device is not detected, or has serious problem
(e.g., no SIM card, SIM pin error, SIM deactivated, and
etc.).
Blinking Vigor device performs initial access procedure.
On SIM card is inserted into the slot and detected by Vigor
device.
(for
Vigor2620Ln)
Blinking No SIM card in detected.
On Vigor device is ready for sending wireless signal.
Off No wireless signal is sent out.
Blinking The data is transmitting via wireless connection.

Draytek Vigor2620 LTE Series Specifications

General

Brand	Draytek
Model	Vigor2620 LTE Series
Category	Network Router
Language	English