Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
346
unbalanced. Please define the required station number for
WLAN (2.4GHz) and WLAN (5GHz) separately.
By Traffic – The operation of load balance will executed
according to the traffic configuration in this page.
Upload Limit –Use the drop down list to specify the traffic
limit for uploading.
Download Limit – Use the drop down list to specify the traffic
limit for downloading.
Force Overload
Disassociation
By Idle Time - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the client’s
station which is idle for a longest time.
By signal Strength - When the access point is overload (e.g.,
reaching the limit of station number or limit of network
traffic), it will terminate the network connection of the client’s
station with the weakest signal.
After finishing all the settings here, please click OK to save the configuration.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering