Need help?Do you have a question about the Dream-Flight r2106gf and is the answer not in the manual?
General| Brand | Dream-Flight |
|---|---|
| Model | r2106gf |
| Category | Aircrafts |
| Language | English |
General safety, flying in open areas, considerate behavior, proper assembly, balance, and trim are crucial for safe operation.
Lists all parts included in the Weasel-TREK kit for assembly.
Lists necessary radio components like transmitter, receiver, servos, and battery for operation.
Specifies essential tools, adhesives, and tapes needed for assembly and repairs.
Details optional items for customization, such as trim sheets and paints.
Recommends specific Futaba transmitter and receiver models for optimal performance.
Step-by-step guide for setting up radio system, including servo connection, mixing, and initial trim settings.
Instructions for attaching servo arms correctly and verifying their rotation for proper control response.
Guide for preparing the fuselage by installing servos and creating a canopy pull-tab.
Steps for preparing elevon hinges and attaching wing panels securely to the fuselage.
Guide for connecting control pushrods to servo arms and control horns using clevises.
Instructions for aligning elevons, adjusting trims, and installing the tail fin for flight readiness.
Locating the designated points on the wing underside to achieve the correct center of gravity for neutral flight.
Adjusting battery position or adding weight to achieve a level balance on fingertips for optimal flight.
Guide to setting low and high rate control surface deflections and exponential for optimal flight characteristics.
Instructions for adding ballast weight to the glider for improved performance in higher wind conditions.
Final checks of battery charge, glider balance, and control surface movements before flight.
Procedure for performing initial test flights and adjusting trims for a stable, straight glide.
Diagnosing and correcting a nose-heavy condition by adjusting weight or elevator trim.
Diagnosing and correcting a tail-heavy condition by adjusting weight or elevator trim.
Using inverted flight to verify the glider's balance and CG location.
Tuning elevator throw and rates to achieve smooth, tight loops and prevent stalls.
Explains the basics of slope soaring and how the Weasel-TREK is suited for beginners.
Key recommendations for safe and enjoyable slope soaring, including seeking advice and respecting the environment.
To Next Page
