16
ENEN
Care & Maintenance
12
6
111
57
210
48
9 3
24 hrs
Cleaning the Soft Roller Brush Bar
1. Push the brushbar head release button
in the direction of the arrow until the cover
of the brushbar head pops to open, then
remove the brushbar head by lifting it in
the direction indicated.
Note: Use small tools to pry the clip away.
2. Use scissor to cut o the hairs and bers
that stick on the roller brush. Wipe the dust
from the notch and transparent cover with
a dry cloth or paper towel.
3. Remove the pre-lter. Rotate the cyclone
assembly slightly to remove from the dust
bin.
4. Rinse the cyclone assembly, pre-lter,
and dust bin until they are clean. After
washing, air dry for at least 24 hours .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
