EasyManua.ls Logo

Dreamer Design Ditto RPS - Seat Washing and Firmness Panels; Harness; Harness Adjustment and Buckling

Default Icon
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To wash the seat take out the firmness
panels by unzipping the pouch at the top and
underneath the seat.
Do not remove the firmness panels
when using your stroller. Removing the
panels could cause suffocation.
s e a t
h a r n e s s
Undo both buckles from the padded center
strap
.
Adjust the padded center strap forward or
backward to fit your child.
Adjust the padded shoulder harness up or
down on the Velcro strips to fit your child.
Buckle the two buckles to the padded center
strap
.
Pull the adjustment strap until the padded
center strap and the padded shoulder harness
are both snug.
Place the child in the seat.
The seat may be washed in cold water
with mild detergent. Snap the seat back on the
frame to dry, to prevent mildewing.
buckles
WARNING Avoid serious injury from
falling or sliding out. Always use seat belt.
adjustment strap
firmness panel

Related product manuals