To Next PageTo Next Page
Need help?Do you have a question about the Dremel DSM20 and is the answer not in the manual?
General| Idle speed (max) | 17000 RPM |
|---|---|
| Input power | 710 W |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| Product color | Multicolor |
Weight and Dimensions| Length | 330 mm |
|---|---|
| Weight | 1700 g |
Declares sound pressure, sound power, and vibration levels measured according to EN60745.
Explains how declared vibration values can be used for comparison and preliminary assessment.
Warns that actual vibration may differ and advises estimating exposure for safety.
Symbol indicates the need to read and follow all instructions before use.
Symbol indicates the requirement to wear eye protection.
Symbol indicates the requirement to wear hearing protection.
Symbol indicates the tool is double insulated and does not require earthing.
Symbol indicates that electric tools, accessories, and packaging should not be disposed of with household waste.
Guidelines for maintaining a clean, well-lit work area and keeping others away.
Precautions regarding plugs, cords, and avoiding water or wet conditions.
Advice on staying alert, using PPE, preventing unintentional starting, and proper attire.
Guidance on charging, using, and storing battery packs safely.
Specific safety guidelines for cut-off operations, including guard use and wheel selection.
Explains kickback and advises firm grip, proper body positioning, and avoiding pinching.
Use caution on edges/corners to avoid bouncing or snagging.
Do not use saw chain or toothed saw blades due to kickback risk.
Use only recommended wheels and guards for safe operation.
Use wheels for recommended applications and ensure rated speed matches tool.
Use correct, undamaged wheel flanges and ensure accessory size is within tool capacity.
Do not jam wheel or apply excessive pressure to prevent binding and breakage.
Position body away from the wheel's path to avoid kickback injury.
Switch off tool if wheel binds; never remove from cut while motion.
Support large workpieces to prevent pinching and kickback.
Exercise caution with pocket cuts to avoid hitting hidden utilities.
Instructions for environmentally friendly recycling of machine, accessories, and packaging.
Technical details of the Dremel DSM20 cut-off tool, including voltage, wattage, speed, and dimensions.
Recommendation to use unrolled extension cords with a capacity of 5 Amps.
Step-by-step guide to install or remove a standard flat wheel assembly.
Step-by-step guide to install or remove a flush cutting wheel assembly.
Step-by-step guide to install or remove a deburring stone.
Instructions for connecting a dust port adapter and vacuum hose for dust extraction.
Overview of the Dremel DSM20's features, versatility, and how to get started.
Explanation of the paddle switch functions, including lock-on and lock-off features.
How to adjust the cutting depth using the depth adjustment lever.
How to use the line guide for accurate cut lines on scrap lumber.
Advice on maintaining a firm grip and using decisive action for general cutting.
Steps for cutting tiles, including scoring and using multiple passes.
Guide for making plunge or interior cuts into workpieces like flooring or siding.
Instructions for performing flush cuts, considering flooring thickness and tool positioning.
Importance of support for large sheets to prevent binding and kickback.
How to attach and use the straight edge guide for parallel cuts.
How to perform rip cuts using a straight edge guide or a rip board guide.
How to use the 2" x 4" cutting guide for accurate cuts in lumber.
How to use the miter/trim guide for miter, bevel, and straight cuts.
Recommends service by authorized personnel to avoid hazards.
How to clean the tool using compressed air and safety precautions.
Notes that there are no user-serviceable parts and recommends authorized service for warranty.
