Dremel VERSA - Page 2

ee CHARGE IT!
Fully charge the tool before use
(approximately 2 hours). A blue light
will illuminate while charging, which
will turn off once fully charged.
CHOOSE AND ATTACH
YOUR CLEANING PAD
The kit includes a brush, backing pad (base),
3 different accessory pads that range from
delicate to abrasive. First, select accessory
based on your application. Align either the
backing pad or the brush to the threads on
the tool and turn clockwise. For use of a
cleaning pad, press the loop side of the
pad to the base of the backing pad. Test
accessory on surface prior to use.
ATTACH SPLASH GUARD
(optional)
The Versa is designed to work with liquid
cleaning solutions. To prevent splatter,
attach the retractable splash guard
before use.
4 CLEAN
To begin cleaning, press the power button
on. Hold tool with a steady grip while using
light pressure as you run the tool back and
forth over the surface to be cleaned. The
Versa is designed to shut off if too much
pressure Is applied.