DRESKAR FT001 - Charge the Remote and Board

CHARGETHEREMOTE/BOARD
Remote charge time 30 minutes.
Indicator will turn from red to green
when fully charged.
USB
30mins
3hrs
1. Plug the charger into the mains socket (Charger Power:
110V-240V, 12V 4.5A). The light on the charger lights up
green.
2. Plug the other end of the charger into the device. The
indicator on the charger will turn red.
When the indicator turns from red to green, the charging is
complete, disconnect the charger from the device and
electrical outlets. Do not overcharge the device, as it may
affect battery life.
WARNING: Never leave board unattended while charging.
12