Need help?Do you have a question about the Dresser Masoneilan Camflex II 35002 Series and is the answer not in the manual?
General| Brand | Dresser Masoneilan |
|---|---|
| Series | 35002 |
| Pressure Rating | ANSI 150 to 600 |
| Body Material | Carbon Steel, Stainless Steel |
| Actuator Type | Pneumatic |
| Flow Characteristic | Equal Percentage |
| Leakage Class | ANSI Class IV |
| Size Range | 1" to 8" |
Details the procedure for removing the actuator from the valve body assembly.
Emphasizes safety steps like isolation, pressure relief, and handling heavy components during disassembly.
Outlines the procedure for replacing the diaphragm in the spring diaphragm actuator.
Stresses the critical safety step of isolating the valve and relieving all pressure before maintenance.
Describes the process of lapping valve sealing parts for a close fit using abrasive compound.
Provides steps for reassembling the spring diaphragm actuator after disassembly.
Guides on reassembling the actuator onto the valve body assembly.
Emphasizes adherence to stem adjustment procedures for correct valve function and to prevent damage.
To Next Page
