TURBODRYER
®
BALLOON
OWNER'S MANUAL
SAFETY
WARRANTY
MAINTENANCE
SPECIFICATIONS
Sahara Balloon
Sahara HP Balloon
Sirocco HP Balloon
PURCHASE DATE: __________________________ SERIAL NO: ________________________________
DISTRIBUTOR: ________________________________________________________________________
THIS MANUAL CONTAINS IMPORTANT SAFETY WARNINGS.
PLEASE READ THESE AND SAVE THIS MANUAL FOR FUTURE REFERENCE.
Dri-Eaz is concerned about the safety of everyone who uses or comes in contact with this unit. The TurboDryer is designed to
be operated in compliance with the safety warnings and instructions provided in this manual. Like other electrical devices, the
TurboDryer can become dangerous if it is abused, damaged or misused. Failure to observe the following warnings can result in
injury to persons, fire or damage to the TurboDryer.
CAUTION - OUTDOOR USE
When using the TurboDryer outside do not use an extension cord and use only with a GFCI protected receptacle.
CAUTION - EXTENSION CORD LENGTHS
Ext ens i on cords mus t be abl e to safel
del i ver 15 am
s t o the unit . Us e of an inade
uat e cord si ze can res ul t in overheat i n
and
hazard. Sel ect appropri ate cord si ze from tabl e. Do not us e a cord sm al l er i n gauge or longer in lengt h than thos e s peci fi ed.
MODEL CORD UP TO 25’ (8M) CORD UP TO 50’ (15M)
Sahara 1 115 Volt 16 AWG 14 AWG
Sahara HP 115 Volt 14 AWG 12 AWG
Sirocco HP 115 Volt 14 AWG 12 AWG
DRI-EAZ PRODUCTS, INC. 15180 Josh Wilson Road Burlington, WA 98233 (360) 757-7776
To Next Page
Need help?
General
