Recommended method: in a women’s small sanitary pad
1
Cut the top o the pad or cut a pocket into it.
2 Insert the sensor into the absorbent padding under the top
layer of the pad with the black sensing strips facing the body.
3
Stick the pad into the crotch of your child’s underwear so
the sensor is close to the wee spot.
Note: Avoid touching the black sensing strips with your ngers as skin
humidity can cause the alarm to trigger.
Wrap the senor in a piece of toilet paper to help it
stay in place near the wee spot and wick the urine
between the sensing strips.
Between 2 snug-fitting pairs of undies
Insert the sensor into the absorbent padding
below the top layer with the black sensing strips
facing the body. Wrap the sensor in a piece of toilet
paper to help it stay in place near the wee spot and
wick the urine between the sensing strips.
Inside a small opening cut inside a diaper near the wee spot
Note: Avoid nappies with absorbent gel as they can stop moisture
getting to the sensor and cause sticky deposits to form on the sensor
which will need to be cleaned o with a gentle brush in cold soapy water.
How to place the sensor
STEP 3
The alarm triggers when moisture gets between the black
sensing strips on the sensor. Place the sensor close to the wee
spot so it detects bedwetting quickly.
Alternative methods:
To Next Page
Loading...
