This document is an installation manual for the DRIPEX Q202A-QW office chair.
Function Description
The DRIPEX Q202A-QW is an office chair designed for comfort and adjustability, featuring a headrest, backrest, seat, and armrests. It is intended for use in an office or home environment to provide ergonomic support during prolonged sitting. The chair includes mechanisms for height adjustment, tilt control, and the ability to swivel.
Important Technical Specifications
The chair assembly requires various components and fasteners:
Components:
- Base joint: The central connection point for the chair's base.
- Base legs (x 5 pcs): The five-star base structure providing stability.
- SGS cylinder: The gas lift mechanism for height adjustment.
- Base joint cap: A cover for the base joint.
- Castors (x 5 pcs): Wheels for mobility.
- Tilt/height control: The mechanism located under the seat for adjusting chair height and tilt.
- Seat: The main seating surface.
- 2D Arms: Adjustable armrests.
- Backrest: The back support of the chair.
- Headrest: The adjustable head support.
Fasteners and Washers:
- Screws M6*12MM (x 10 pcs): Used for various connections, including the base legs to the base joint (Step 1).
- Screws M6*35MM (x 5 pcs): Used for attaching the backrest to the connector (Step 9).
- Washers M6*15MM (x 6 pcs): Used with screws for the armrests (Step 5).
- Screws M6*20MM (x 4 pcs): Used for attaching the tilt control to the seat (Step 7).
- Washers M8*17MM (x 4 pcs): Used with screws for the tilt control (Step 7).
- Screws M8*20MM (x 3 pcs): Used for attaching the backrest to the seat (Step 8).
- Washers M8*13MM (x 3 pcs): Used with screws for the backrest (Step 8).
- Screws M6*20MM (x 2 pcs): Used for attaching the headrest to the backrest (Step 9).
- Screwdriver (x 1 pc): Included for assembly.
Usage Features
The DRIPEX Q202A-QW chair offers the following usage features:
1. Seat Height Adjustment:
- To raise the seat: Pull the lever outward. Then, lift your buttocks off the seat, and the seat will rise to your desired height. Push the lever inward to fix the height.
- To lower the seat: Keep yourself seated on the product. Pull the lever outward. Then, push the lever upward to your desired comfort height. Push the lever inward to fix the height.
2. Tilt Adjustment:
- To adjust the tilt of the backrest, pull the lever outward. Then, lean your back on the backrest, pressing backward with your back to achieve your desired comfort angle. Push the lever inward to fix the angle.
General Usage Notes and Warnings:
- For one person to sit on. Do NOT stand on the chair.
- Do NOT sit on the armrest in case of danger.
- Do NOT put overweight on the chair, or use it as a trolley.
- Do NOT let children under 5 years old sit on the chair alone.
- To avoid danger of suffocation, keep the plastic bag away from babies and children.
- If parts are missing, broken, or damaged, stop using the product until repairs are made using factory authorized parts.
Maintenance Features
Care and Cleaning:
- Do NOT get the chair close to fire or a wet, acidic, and corrosive environment. Avoid overexposure to the sun.
- Do NOT use sharp or hooked objects to scrape the chair.
- Do NOT use abrasive chemicals for cleaning.
- If the frame is stained, wipe clean with warm water or a pledge surface cleaner (available on Amazon).
- If squeaks occur, tighten screws underneath the seat.
Customer Support:
For parts missing or any quality issues, customers can message DRIPEX via Amazon or email with their order ID and photo/video proof. DRIPEX promises to respond within 24 hours. The support email is support@dripex.co.uk.
Need help?
General
To Next Page