Drive 18080 - Safety Overload Protection

.............................................................................................................
DRIVE COMPRESSOR/NEBULIZER MODEL 18080, 18081, 18082
............................................................................................................
10
Safety Overload
NOTE Do not exceed 30 minutes of continuous operation.
1. The motor of this device has a built-in thermal overload protector. Should the
motor overheat, the protector will automatically shut off the motor. Should this
occur, turn the I/O (ON/OFF) switch to the O (OFF) position and allow the motor to
cool down for approximately 30 minutes before turn it on again.
2. If the overload protector shuts off the motor frequently, you may have an unstable
voltage situation.