Drive Clever-Lite LS - Assembly Instructions; Safety Precautions; Push Down Lock Operation

assembly instructions
Do not aempt to adjust or operate walker without
carefully reading all instructions in this manual.
1. Remove all contents from carton.
2. Open walker and lower seat to down position.
push down lock
safety precautions
1. Please make sure the walker is fully opened, seat is
down and secured in the down position.
2. Test walker for stability before applying full weight to
hand grips.
3. Replace tires when significantly worn or damaged.
4. Do not have anyone push you while you are
seated on the walker.
5. To fold walker, li seat to upright position. Deploy
one trigger release and swing brace to closed
position. Repeat on the other side.
NOTE: This is a walking aid only. It is not to be used as a
transportation device.
WEIGHTCAPACITYLBS
Wide
Comfortable
Seat
Trigger Release
Allows For Easy
Folding
Backrest
Hand Grip
10233 Shown
Always engage and disengage rear push locks on both
sides simultaneously.
TO SLOW DOWN OR COME TO A TEMPORARY STOP
Push down slowly by applying weight on the handles
until unit slows down or comes to a temporary stop.
TO RELEASE REAR PUSH LOCKS
Remove weight until wheels start moving freely.
REV2.3.26.13