Attaching the Carry Bag
Fold the Nitro and push the sliding block from bag into guiding sleeve on the Nitro.
Unfold the Nitro. (see figures 4-6).
Braking/Locking
Pull both brake levers upwards to apply the brakes
while the Nitro is moving (see figure 7). Always
brake slowly and steady.
Press both brake levers down to apply the locks
while the Nitro is stationary (see figure 8). Pull up
the brake levers and release to release the locks.
The effect of the brakes can be affected by
abrasion of the wheels.
Regularly test the brakes.
4
5
6
7
8
To Next Page
Loading...
