Drobo 5N Getting Started Guide 35
outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced
radio/TV technician for
help. Any changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the device. Where shielded interface cables have
been provided with the product or specified additional components or accessories elsewhere defined to be
used with the installation of the product, they must be used in order to ensure compliance with
FCC
regulations.
This Class B digital apparatus meets all requirements of the Canadian interference-Causing Equipment
Regulations. Cet appareil numeriquede la classe
B
respecte toutes les exigencesdu Réglement sur le materiel
brouilleur du Canada. Please see
http://www.drobo.com
for additional compliancy
information
Industry Canada Statement
Complies with the CanadianICES-003 Class
B specifications. Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada. This
device
complies with
RSS 210
of Industry
Canada.
This Class B device meets all requirements of the Canadian
interference-causing equipment regulations.
Cetappareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
VCCIClass B Statement
VCCI
クラス
B
基準について
情報処理装置等電波障害自主規制について
この装置は、情報処理装置等電波障害自主規制協議会（
VCCI
）の基準にもとづくクラス
B
情報技術装置です。
この装置は家庭環境で使用されることを目的としていますが、この装置がラジオやテレビジョン受信機に近接し
て使用されると、
受信障害を引き起こすことがあります。
説明書に従って正しい取扱いをしてください。
B1200i Specifications & Systems Requirements –
Power Supply: AC Input: 100/240 VAC, 8A/5A, 50/60
Hz; Operating Temperature: 10°C-35°C (50°-95°F); Non- operating (storage): -10°-60°C (14°-140°F);
Operating Humidity: 20% - 80%; Dimensions: 17.17” wide x 5.20”tall x 21.85 ” long (436.1 mm wide x 132.1
mmtall x 555.0 mm long); Weight: 47 lbs (21.3 kgs); Storage:Accepts up to twelve 3.5” SATA II, SATA III,
or SAS drives; Interfaces: Three Gigabit iSCSI and one Gigabit Ethernet for management;
Drobo Dashboard Application (recommended): Microsoft® Windows® Operating Systems,Apple®
Macintosh® OS-X v10.5+;File system support: NTFS, HFS+, and EXT3.
FCC
Compliance & Advisory Statement –
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15
of
the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not
occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures: 1) Reorient or relocate
the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect
the
equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer
or an experienced radio/TV technician for
help. Any changes or modification not expressly approved by the
party responsible for compliance could void the user’s authority to operate the device. Where shielded
interface cables have been provided with the product or specified additional components or accessories
To Next Page
Loading...
