This is the default setting.
Manually Assign IP Settings Sets an IP address specifically for the DroboShare that
will not change. DroboShare will always be identified on
the network by this IP address.
Make DroboShare Volumes Public Allows anyone on the network to access the data on the
DroboShare-attached Drobos.
This is the default setting.
Make DroboShare Volumes Password-Protected Requires a username and password authentication for
access to the data on the DroboShare-attached Drobos. If
this is enabled, the user will be prompted for the
username and password when they access this specific
Drobo tab in Drobo Dashboard. The username and
password will only have to be supplied once.
39
To Next Page
Loading...
