K163 Issue No. 3
ii
DPI 520 User Manual
SAFETY
The Manufacturer has designed this product to be entirely safe when operated
correctly.
●●
●●
●
Please pay close attention to the Safety Instructions outlined on this page and
elsewhere in this manual. They have been designed to protect the user from
personal injury and the equipment from damage.
●●
●●
●
Potentially hazardous operations are indicated in the text by
means of a hazard warning triangle. Specific warnings
relating to each section of the manual are given at the
beginning of that section. On the instrument, this symbol
indicates that the user should refer to the User Manual.
●●
●●
●
Please observe the installation advice and any operational limits given in this
manual.
●●
●●
●
This equipment must only be used for the purpose for which it was designed
Pressure Safety
Do not permit pressures greater than the Safe Working Pressure to be applied to
the instrument. The specified Safe Working Pressure for the instrument is stated
in the Specification section of this manual.
Electrical Safety
The instrument is designed to be completely safe when used with Options and
Accessories supplied by the manufacturer for use with the instrument.
Toxic Materials
During normal operation it is not possible for the user to come into contact with any
hazardous substance which might be employed in the construction of the instru-
ment. The use of hazardous materials in the construction of this instrument has
been minimised.
To Next Page
