OPERATING INSTRUCTIONS
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this plug will
fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
USAGE
TO
ADD ATTACHMENT: Align the notches inside the
handle with the notches on the attachment. Push
and twist into handle until it snaps into place.
TO REMOVE ATTACHMENT: Wait until the
attachment is cool to the touch. Press and hold
both release buttons and slide attachment out of
the handle with a slight twist.
1. Select preferred blow-dryer attachment.
2. Plug in blow-dryer and select appropriate speed
and heat settings. (See styling tips below.)
3. Once desired style is achieved, turn off blow-dryer
and unplug.
RELEASE BUTTONS
TWIST WHILE
ATTACHING OR RELEASING
To Next Page
Loading...