Step 4 – Program communication options on the control panel via keypad
GS2065/TL265GS with PC9155 control panel
o [301], [302], [303], [305] Program Communication Path
• DCAA - Internal (Ethernet 1, Ethernet 2, GPRS 1, GPRS 2)
• DCBB - Ethernet Receiver 1
• DCCC - Ethernet Receiver 2 (backup)
• DCDD - GPRS Receiver 1
• DCEE - GPRS Receiver 2 (backup)
o [350] option: Program Communication Format (Communicator)
• (If Option [301] (above) is set to DCAA, Option [350] must be set to
SIA, sub-option 5)
o [351] to [376] options: Program Call Direction
o [382] option: Enable T-LINK Interface (Option [5])
o [383] option: Program Back up Communication
o [167] option: Enable Communication Wait For ACK (Set to 60 seconds)
o [401] option: Enable DLS Session Through GPRS or Ethernet (Option
[1])
To Next Page
Loading...