Communicator Controlled Call Routing
– Backup (dual-path)
– Redundant (dual-path)
Required Programming
Panel Sections [301], [302],[303] and [305]
•Any of them could be programmed as DCAA
Communicator Sections [005]
Option [4] ‐ Primary and backup path
[ON]: GPRS path primary, Ethernet path backup
[OFF]: Ethernet path primary, GPRS path backup
Option [5] ‐ Redundant between GPRS path and Ethernet path
[OFF]: Disable redundancy
[ON]: Enable redundancy
Backup Mode 1:
Ethernet Primary, 4 Receivers
Ethernet Receiver 1
Ethernet Receiver 2
GPRS Receiver 1
GPRS Receiver 2
IP Receiver* 1
IP Receiver 2
IP Receiver 3
IP Receiver 4
Tx 2 failed, TX3
TX 1
Tx 3 failed, Tx4
Tx 1 failed, Tx2
To Next Page
Loading...