Wiring Diagrams
56
B.2 PC5020CF and PC5700 Fire Module Communications Connections
B.3 Battery Lead and AC Power Lead Routing for Central Station Fire Monitoring Systems
REDBELL
+
AUX
–
AC
BLK YEL GRN Z1 Z3 Z5 Z7COM
COM
COM COMZ2 Z4 Z6 Z8 RING TIP R-1
T- 1
EGNDPGM
1324
PC-LINK Connection
SI
SO
UA186
PC5020
Supervised
To Local
Phones
To Local
Phones
Control Panel
PC5020
INSTALL BATTERY AND AC WIRING AS SHOWN ABOVE
IMPORTANT: A minimum 1/4" (6.4mm) separation must be
maintained at all points between battery/primary AC wiring
and all other wiring connections.
POWER
LIMITED
POWER
LIMITED
NON-POWER
LIMITED
WARNING: Do not route any wiring
over circuit boards. Maintain at least
1" (25.4mm) separation.
Cable Tie (not provided)
Cable
Tie
To prevent wires from falling onto batteries,
secure them to the enclosure or to the plastic
standoff located under the control panel.
Power Limited
Non-Power
Limited
Class2
Power
Limited
5700
37VA
7Ah7Ah
+
-
+
-
Voltage
Barrier
For fire installations,
lines comethrough
conduit connections.
KEYBUS
To Next Page
Loading...
