Chapter 3 Programming Procedures
13
(000) Day Greeting
Function 000
Steps [1]+ [voice]+ [# ]
Description
This function stores a greeting message which you want
the system to play during the business hours.
The operations is described as follows:
1. Press [0][0][0] for day greeting recording.
2. Press [1] after you heard the previous recorded
message. Start your recording after the beep tone.
3. Press any button after you finished.
To erase the your greeting message and restore the
default message, please follow the steps below:
1. Press [0][0][0] for day greeting recording.
2. Press [1] after you heard the recorded message.
3. Press any button about 1 second after you hear the
beep tone. The recorded message is now erased.
(010) Night Greeting
Function 010
Steps [1]+ [voice]+ [# ]
Description
This function stores a greeting message which you want
the system to play during non-business hours. Please
refer to function 000 for operation details.
(014) Message Lamp Sequence Channel Valid Range: 1-4 Default: 1,2,3,4
Function 014
Steps [1]+ [?][?][?][?]+ [# ]
Description
This function sets channel to trun on or turn off message
lamp. When user got a new message, system will trun on
message lamp, this function also can restrict only certain
channel to trun on message lamp.
To Next Page
Loading...
