Chapter 3 Programming Procedures
15
this code, system will guide incoming call to multi-level
inquiry and play inquiry greeting 060.
Example: [1] + [5] + [#]
This sets the multi-level inquiry code to [5]. After the
system repeats the multi-level inquiry code back to you,
Press [2] to confirm and return to main menu.
(040) Special Announcement
Function 040
Steps [1]+ [voice]+ [# ]
Description
This function stores a special announcement which you
want the system to play for special situation, such as
public holidays, etc. If the special announcement is
recorded, it will replace all other greetings and
announcement. Once the special announcement is erased,
all other greetings and announcements will be restored.
Please refer to function 000 for operation details. (Erase
special announcement is press [1] to record. After system
plays “beep“ and press any key to end recording, then it
will erase special announcement)
(044) PBX Model Valid Range : 0-999 Default : 0
Function 044
Steps [1]+ [?][?][?]+ [# ]
Description
This function sets for choosing PBX model. There are
many different PBX models and each model signal format
may be different Base on different model to set.
Example: [1] + [1] + [#]
This sets the PBX model to [1] (1 is for Panasonic). After
the system repeats the PBX model back to you, Press [2] to
confirm and return to main menu.
To Next Page
Loading...
