in
EDIT
PROGRAM
mode
there
are
6
fundion
see
[Fig.
1
5
pm
6.1
]
GO
key:
Press this key
to
start the program.
Note:
Keep Master Dimmer Faders to the maximum (see par
6.7
7)
The key becomes
PAUSE
the display changes as shown in (Fig. 15 par
5.31
PAUSE
key:
Press this key to stop the program in the current position, pressing the
W
key
it
recovers from the same position.
SELECT
key:
Pressing this key
it
is possible the multiple selection of the programs. The
display changes as shown in [Fig. 14) see par
5.3
Press one of the
1
+l
2
keys to select the program.
For successive programs use the
PAGE
key.
REPEA
T
key:
Press this key to modify the number of repetitions of the program, the value is
in
number from 1 to
99
use the faders under the REPEATwriting, or the enco-
der. For confirm the modify press the
OK
key, for get out of the function press
the
ESC
key.
LENGTH
key:
Press this key to set how many scenes of the program will execute, the value is
in
n~lrnber from
1
to
48
use the faders under the LENGTH writing, or the enco-
der.
For confirm the modify press the
OK
key, for get out of the function press
the
ESC
key.
MUSIC
key:
Pressing this key, and activating
MUSE
ON,
the active program will change the
scenes to time of music, in the box of the program and
to
the side at symbol
play the display shows a note.
The internal music sensor has an automatic gain adjustment which allows to
have a signal level good for
Top
48
working.
The
inpilt music signal is a OdB mono/stereo so it could be taken from sound
swrces like Mixer, CD, Dat etc.
UMTS
keys:
Press this key to set what unit will be active in the program.
For successive units use the
PAGE
key.
To Next Page
Loading...