GO
key:
Press this key to start the show.
The key becomes
PAUSE
the display changes as shown in [Fig.
40
par
8.31
PAUSE
key:
Press this key to stop the show in the current position, pressing the
W
key
it
recovers from the same position.
EDIT
key:
It
allows to modify the parameters of the show see par
8.4.
PAGE
key:
Pressing one of these two keys you go
to
the following /next page
SPEED
key:
Pressing one of these two keys you increase/decrease the speed of the show the
value is in percent and varied from
10%
to
500%.
-
I
o
the 100% value the speed is the original.
To Next Page
Loading...