Safety attentions (Failure to follow these instructions can be
damage your product, and cause serious bodily injury or death.)
● Not suitable for children under 14 years old without adult guidance;
● Do not use it in the high temperature or humid environment;
● When using this product in strong vibration environment, vibration
mitigation measures should be used;
● Do not cover VR Pro in use;
● Since the output current is large, please use 2 output wires to
connect the receiver;
● This product supports switching voltage. Please select the voltage
according to the supply voltage of your receiver, servo or other
equipments;
● Do not change the output voltage while VR Pro is working;
● Output port short circuit will damage VR Pro;
● In order to ensure the VR Pro working properly, please obey the
following formula to limit the thermal power in a safe range:
(1) (input voltage - output voltage) x output current < = 10W;
(2) Please pay special attention to that, if the VR Pro current
is over 10W for a long time, the temperature will rise quickly,
it will damage the regulator;
(3) When the cooling fan is mounted (#46816, optional), the
thermal power can be increased to15W;
(4) VR Pro will not stop working when the input current is too
large. But the internal limit working temperature is 120
degrees. When the temperature is more than this limit, it will
damage the control IC.
● The voltage indication and alarm is preset according to the lithium
polymer battery.
● Notes: If you don't use the regulator in 24 hours, you'd better
disconnect it from the battery because it remains a 2mA quiescent
current.
- 3 - - 4 -
To Next Page
Loading...