The relevant window (C, Fig 88) is displayed:
●
If the function is disabled, is shown with the
stopwatch and indication of the available laps
(D, Fig 89); press ENTER (3) to enable the
function.
●
If the function is enabled, On is shown with the
stopwatch and indication of the available laps
(E, Fig 89); press ENTER (3) to disable the
function.
When the function is active, Lap is displayed next to
the gear indication.
Below the stopwatch is the current lap number. It is
possible to record maximum 30 laps. Once the
function is activated, flash (4, Fig 87) must be
used to the stopwatch: the first time the
flash is pressed, the stopwatch flashes for 1
second.
Then, every time the flash (4) is pressed, the
stopwatch flashes for 1 second displaying the time
just completed and returns to display the time in
progress.
If the time just completed is the best among those
recorded up to that moment, the stopwatch displays
the time just recorded flashing for 1 second and
Air
24
°C
0
km/h
90
°C
10:34
pm
rpm X1000
4
1
2
3
5
6
7
8
10
12
NN
Gear
Total
Range
2017 km
250 km
SPORT
00’00.00
Off
Lap 1/30
C
DTC
DQS
ABS
DWC
3
3
5
On
Fig 88
00’00.00
Off
Lap 1/30
00’00.00
On
Lap 1/30
D
E
Fig 89
113
To Next Page
Loading...
Need help?
General
