Pairing
This function allows pairing a new Bluetooth device.
●
Use (1) and (2) from the Interactive
Menu to select the menu item and press
ENTER (3).
●
Select the Bluetooth item and press ENTER (3).
●
Select the Pairing item and press ENTER (3)
(Fig 180).
The 3 types of devices that can be paired are
displayed: rider headset, passenger
headset (Fig 181).
With (1) and (2) select the type of device you
wish to pair. Press ENTER (3) to confirm and the
device search.
The instrument panel searching for nearby
Bluetooth devices, and displays the message
"Wait..." followed by a list of detected devices
(Fig 182). As soon as the search stage is over, system
gives out a list of all detected devices.
Use the (1) and (2) to select the required
device and press ENTER (3).
The display shows the message "Pairing…" on the
right, while waiting validation by the Bluetooth
device. If you are pairing a the
Fig 181
Fig 182
184
To Next Page
Loading...
Need help?
General
