the units of measurement: Speed
This function allows to change the units of
measurement of speed (and hence even the ones of
distance travelled).
When entering this function, the currently used unit
flashes.
With (1) and (2) it is possible to scroll the
available units “km/h” and “mph”, and select them
(flashing).
Press (4) to save the selected unit and the
instrument panel goes back to the previous
displaying mode.
To exit and go back to the previous displaying mode
without editing the parameter, keep (2)
pressed for 2 seconds.
Fig 148
197
To Next Page
Loading...
Need help?
General
