Need help?Do you have a question about the Ducati SUPERBIKE 848 MY 2008 and is the answer not in the manual?
General| Brand | Ducati |
|---|---|
| Model | SUPERBIKE 848 MY 2008 |
| Category | Motorcycle |
| Language | English |
Provides guidance on manual consultation, symbols, and safety warnings for effective use.
Explains graphic symbols, abbreviations, and references used throughout the manual.
Details safety precautions and warnings for hazardous materials and hot parts during maintenance.
Explains the identification numbers and EC nameplate for the Superbike 848.
Lists detailed technical specifications including dimensions, frame, suspension, wheels, brakes, and engine.
Provides visual representation and specific measurements of the motorcycle's dimensions.
Specifies the types and quantities of fuel, lubricants, and other fluids required for the motorcycle.
Lists essential torque values for various parts and assemblies, crucial for correct assembly and safety.
Details specific tools required for engine and frame servicing.
Describes diagnostic tools like the DDS tester and multimeters for electrical system checks.
Outlines essential checks to perform before riding, including fuel, oil, brakes, tires, and controls.
Explains the procedure for starting the engine and proper warm-up to ensure correct lubrication.
Provides a schedule of programmed maintenance operations for dealer and client at specified intervals.
Details specific maintenance tasks like oil changes, valve clearance checks, coolant replacement, and brake fluid service.
Covers the use of diagnostic instruments for system checks and troubleshooting.
Details the removal and refitting of the headlight shell and rear-view mirrors.
Explains the procedure for removing and refitting various fairing panels.
Covers the removal and refitting of the seat, seat cowling, and side panels.
Describes the removal and refitting of the front mudguard.
Explains adjustment, removal, and refitting of the throttle twistgrip.
Details the removal and refitting of the hydraulic clutch master and slave cylinders.
Covers removal and refitting of the front brake master cylinder.
Details removal, disassembly, and refitting of the rear brake control.
Explains removal, disassembly, and refitting of the gearchange mechanism.
Covers removal, overhauling, and refitting of the front wheel and its components.
Details the removal, overhauling, and refitting of the front fork assembly.
Explains maintenance operations, removal, refitting, and overhauling of the front brake system.
Covers removal, overhauling, and refitting of the rear wheel.
Details removal, refitting, inspection, and overhauling of the rear swingarm.
Covers removal, refitting, and overhaul of the rear brake caliper and disc.
Details the removal, overhauling, and refitting of the rear shock absorber and related components.
Covers inspection, removal, and refitting of the final drive components, including sprockets and chain.
Details the removal and refitting of the handlebars.
Covers adjustment of steering head bearings, removal, and refitting of steering head components.
Explains the removal and refitting of front and rear footrest brackets.
Details the removal, disassembly, and refitting of the sidestand.
Outlines procedures for frame inspection, disassembly, and reassembly of structural components.
Covers the removal and refitting of the number plate holder.
Details the removal, refitting, and renewal of the fuel tank and its components.
Covers refitting of the airbox and throttle body assembly.
Explains the removal and refitting of the air filters.
Details the removal and refitting of the exhaust system components.
Describes the removal, refitting, and positioning of the evaporative emissions canister system.
General overview of the fuel injection and ignition system.
Lists and briefly describes key components of the fuel injection and ignition system.
Provides a step-by-step guide for removing and refitting the entire engine assembly.
Details the removal, disassembly, reassembly, and refitting of the oil pump.
Covers the removal, inspection, and refitting of the oil cooler.
Explains the removal and refitting of the coolant expansion tank.
Details the removal, renewal of cooling fan, and refitting of the radiator.
Covers the removal and refitting of the water pump.
Guides through checking and adjusting valve clearances and valve lift.
Details the removal, refitting, and checking of timing belts, pulleys, and related components.
Covers the removal, checking, and refitting of camshafts and supports.
Provides procedures for valve removal, rocker arm removal, and overhaul of cylinder head components.
Explains the removal, overhaul, and refitting of cylinder/piston assemblies.
Details the description, removal, checking, and reassembly of the clutch assembly.
Covers the removal, disassembly, reassembly, and refitting of the clutch-side crankcase cover.
Explains removal, refitting, and checking backlash of primary drive gears.
Details the removal, disassembly, and refitting of the gearchange mechanism.
Covers the removal, disassembly, overhaul, and reassembly of gearbox shafts.
Details removal, disassembly, overhaul, and refitting of the flywheel-alternator assembly.
Explains the removal and refitting of external components attached to the crankcase.
Covers separation, overhaul, and reassembly of the crankcase halves, including shimming.
Details the removal, disassembly, overhaul, and refitting of the crankshaft/connecting rods assembly.
Provides detailed wiring diagrams, color codes, and fusebox information for electrical system troubleshooting.
Explains how to check, recharge, and store the battery, along with alternator specifications.
Covers the starter motor, starter contactor, and their operation.
Details the procedure for changing light bulbs, relays, and headlight aim adjustment.
Covers checking indicating system components, coolant temperature sensor, fan relay, and light bulbs.
Explains how to check protection and safety device components, including fuses.
Describes the instrument panel, its system, display settings, and functions.
Explains the immobilizer system, keys, antenna, operating principle, and override procedures.
Details various diagnostic instruments like DDS tester and multimeters for electrical system checks.
To Next Page