Need help?Do you have a question about the Dudek Universal 1.1 25.5 and is the answer not in the manual?
Describes who the paraglider is for and its dual free-flying/paramotor capabilities.
Details on design features like DOA, CSG, LR, FET, ACS and manufacturing quality.
Diagram illustrating the different lines, pulleys, handles, and carabiners on the risers.
Explanation of the Easy Launch Riser (ELR) and speed-system features.
Description of trimmers and the three levels of pulleys for hangpoint adjustment.
Explanation of the Easy Keeper system for holding brake handles with magnets.
Details on the TCT system allowing rigid, half-rigid, or soft brake handle configurations.
Guidelines on matching canopy to paramotor and understanding weight limits for safe operation.
Advice on selecting a harness and performing initial setup checks before flight.
Instructions for adjusting steering lines, pulleys, and speed systems for optimal configuration.
Detailed pre-flight checks for lines, risers, and general safety before launching.
Visual guide on how to align pulley levels and steering line marks with suspension height.
Illustrations showing different pulley positions and EK magnet placements for setup.
Comprehensive checklist of pre-flight inspections for canopy, lines, risers, and paramotor.
Step-by-step guide for performing a classic forward paraglider launch in light winds.
Instructions for executing a reverse paraglider launch in winds exceeding 3 m/s.
Advice on stabilizing the wing overhead and executing smooth turns during flight.
Warnings regarding speed-system connections and bringing the wing overhead during launch.
Techniques for turning, thermalling, and soaring, including brake and weight shift usage.
Guidance on using trimmers and speed system for optimal flight performance and speed.
Steps for performing a standard landing, including flare and final approach.
Instructions and precautions for paraglider launch and flight using a winch system.
Recommendations for initial powered flights with trimmers closed for familiarization.
Guidance on launching in calm conditions, emphasizing headwind importance.
Steps for laying out the canopy, checking lines, and clipping risers for paramotor launch.
How to manage engine thrust, canopy rise, and initial ascent during powered launch.
Instructions for clipping in, inflating the canopy, and initiating take-off with a paramotor.
Method for performing a reverse launch with a paramotor in strong wind conditions.
Technique for launching with hands crossed, emphasizing prior practice.
Guidance on climbing safely, avoiding steep climbs, and managing engine torque.
Explanation of oscillations caused by engine/propeller configuration and how to avoid them.
How to achieve level flight, utilize the reflex profile, and manage brakes.
Essential safety rules for symmetrical trimmer activation and release.
How trimmer settings affect the airfoil's lift and reflex characteristics.
Importance of smooth steering at high speeds to maintain stability.
Warning against engaging the speed system with closed trimmers to prevent deflations.
Detailed instructions on how to properly activate the trimmer system.
How brake input affects stability and the reflex profile when trimmers are released.
Typical steering mode with closed trimmers for launch, landing, and thermalling.
How closed, neutral, and released trimmers affect speed, sink, and airfoil shape.
How trimmer settings influence speed system effectiveness and stability.
Steps for landing without engine power, emphasizing a controlled glide and flare.
Instructions for landing with the engine idling, including flare and engine shutdown.
Essential safety guidelines for paragliding with a paramotor, covering fuel, checks, and flying practices.
How to induce and manage "Big Ears" for a rapid descent, including cautions.
Procedure for performing a B-Stall descent with closed trimmers and recovery.
Description and cautions regarding spiral dives and wing overs on released trimmers.
Warning against aerobatics and emphasizing safe flying over rapid descent techniques.
Guidance on avoiding side/front collapses and full stalls, especially with reflex profile.
Methods to prevent deep stalls and manage line tangles (line over/cravatte).
Using D-risers or stabilo lines for steering when normal controls are impossible.
Proper methods for cleaning and storing the paraglider to ensure longevity.
Information on how UV rays and improper storage can deteriorate the paraglider fabric.
Tips on line care, preventing damage, and procedures after landing in water or sea.
Guidelines for paraglider repairs and recommended inspection intervals.
Details on warranty coverage duration and exclusions for free-flying and paramotor use.
Conditions under which the paraglider warranty remains valid.
Explanation of the optional AeroCasco insurance, coverage, and extension.
Guidelines for environmental awareness and preservation while paragliding.
Information on the proper disposal and recycling of used paraglider equipment.
List of items that should be included with the purchased paraglider.
Comprehensive technical specifications for different sizes of the Universal 1.1 paraglider.
Explanation of how line lengths are measured, tolerances, and repair guidelines.
Visual representation of the paraglider's line layout and connection points.
Concluding remarks emphasizing safe flying and pilot responsibility.
To Next Page
General
